三个Python小工具，Linux服务器性能直线飞起！！！- 汇维网

为加快巡检速度和知晓服务器状况，我使用了multiprocessing.dummy多线程、pampy模式匹配和一个elementUI组件，这些工具确能帮忙处理实际问题：

一行代码实现并行

原本二十多台服务器巡检用shell需3分钟完成，用multiprocessing.dummy模块后只需十几秒

pampy模式匹配

搭配正则，匹配出2块磁盘的使用率，方便前端页面展示。数据是从真实服务器上获取的。

import re
from pampy import match
disk_usage = 'diskname: /dev/vda1 used: 35G nouse: 59G USAGE: 35.35% diskname: /dev/vdb1 used: 278G nouse: 190G USAGE: 56.39%'
re_regular = re.compile('diskname: (/\w+/\w+).*USAGE: (.*)% diskname: (/\w+/\w+).*USAGE: (.*)%')
m= match(disk_usage, re_regular, lambda a,b,c,d: b+','+d)
print(m)

结果如下：35.35,56.39

匹配好后，这2个值很方便就能在前端页面进行展示了

使用elementUI的progress进度条展示内存百分比

这是elementUI官网的进度条组件

这是使用它的效果：

下面详细介绍这3点：

1. 一行代码实现并行

在某台服务器上做免密钥登录，能直连到其它服务器执行shell脚本，之前的巡检是通过shell脚本执行的：

#登录不同的ip，依次执行/home/ssw/目录下的检查脚本
for ip in `cat /home/ssw/iplist`;do ssh user@$ip "/bin/sh /home/ssw/weekly_check.sh";done

因为是串行执行，经常等到花儿都谢了。于是改用python去执行这些shell命令：cpu、内存、磁盘的检查命令都一样，不同的服务只需定义一个字典，根据ip添加相关命令。再pool.map()一行实现多线程。

# -*- coding: utf-8 -*-
import paramiko
import json
from datetime import datetime
import traceback
from pprint import pprint
from multiprocessing.dummy import Pool as ThreadPool
def weekly_check(ip):
    #基础巡检指标
    cmds_dict = {'cpu_usage':'TIME_INTERVAL=5;LAST_CPU_INFO=$(cat /proc/stat | grep -w cpu | awk '{print $2,$3,$4,$5,$6,$7,$8}');LAST_SYS_IDLE=$(echo $LAST_CPU_INFO | awk '{print $4}');LAST_TOTAL_CPU_T=$(echo $LAST_CPU_INFO | awk '{print $1+$2+$3+$4+$5+$6+$7}');sleep ${TIME_INTERVAL};NEXT_CPU_INFO=$(cat /proc/stat | grep -w cpu | awk '{print $2,$3,$4,$5,$6,$7,$8}');NEXT_SYS_IDLE=$(echo $NEXT_CPU_INFO | awk '{print $4}');NEXT_TOTAL_CPU_T=$(echo $NEXT_CPU_INFO | awk '{print $1+$2+$3+$4+$5+$6+$7}');SYSTEM_IDLE=`echo ${NEXT_SYS_IDLE} ${LAST_SYS_IDLE} | awk '{print $1-$2}'`;TOTAL_TIME=`echo ${NEXT_TOTAL_CPU_T} ${LAST_TOTAL_CPU_T} | awk '{print $1-$2}'`;CPU_USAGE=`echo ${SYSTEM_IDLE} ${TOTAL_TIME} | awk '{printf "%.2f", 100-$1/$2*100}'`;echo ${CPU_USAGE}',
                 'mem_usage':'MEM_USAGE=`/usr/bin/free | awk '/Mem/{printf("RAM Usage: %.2f%\n"), $3/$2*100}' |  awk '{print $3}'`;echo ${MEM_USAGE}',
                 'disk_status':'DISK_STATUS=`df -h | grep "^/dev/vd" | awk '{printf "diskname: %-10s used: %-5s nouse: %-5s USAGE: %.2f%\n",$1,$3,$4,$3/$2*100}'`;echo ${DISK_STATUS}',
                 'network': 'if ping -c 5 www.baidu.com &>/dev/null;then echo "Network: OK";else echo "Network: NOT OK";fi',
                 'boot_log': 'B=`cat /var/log/boot.log`;if [ "$B" = "" ];then echo "Bootlog: OK";else echo"Bootlog: NOT OK";fi',
                }
    if ip == '172.16.1.21':
        cmds_dict['mysql'] = 'mysql_pid=`ps -ef | grep mysql | grep -v grep | awk '{print $2}'`;if [ "${mysql_pid}" = "" ];then echo "Mysql_service: NOT OK";else echo "Mysql_service: OK!  pid is ${mysql_pid}";fi'
    elif ip == '172.16.1.22':
        cmds_dict['es'] = 'es_pid=`ps -ef | grep elasticsearch | grep -v grep  | awk '{print $2}'`;if [ "${es_pid}" = "" ];then echo "Es_service: NOT OK";else echo "Es_service: OK  pid is ${es_pid}";fi'
    elif ip == '172.16.1.23':
        cmds_dict['redis_cluster'] = 'NUM=` ps -ef | grep redis | grep -v grep |awk '{print $2}' | wc -l`;echo "the running redis-cluster node is $NUM"'
    try:
        #创建ssh客户端
        client = paramiko.SSHClient()
        #免密钥登录
        private_key = paramiko.RSAKey.from_private_key_file('/home/ssw/.ssh/id_rsa')
        client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
        client.connect(
            hostname=ip,
            username='ssw',
            port=22,
            pkey=private_key,
            timeout=30
        )
        #新建一个空字典存储输出结果
        result = {}
        for k,v in cmds_dict.items():
            stdin, stdout, stderr = client.exec_command(v)
            if not stderr.read():
                result['ip'] = ip
                result[k] = stdout.read().decode('utf-8').strip()
            else:
                pass
    except Exception as e:
        pprint(ip+" error:"+str(e))
        pprint(traceback.format_exc())
    finally:
        client.close()
    return result
if __name__ == '__main__':
    ip_list = ['172.16.1.21','172.16.1.22','172.16.1.23']
    pool = ThreadPool(8)
    ret = pool.map(weekly_check,ip_list)
    pool.close()
    pool.join()
    #结果写入excel
    with open('/home/ssw/game_server_%s.xlsx' % datetime.now().__format__('%m-%d'),'w') as f:
        f.write(json.dumps(ret))

有些服务器有2块磁盘,有些只有1块，这是执行脚本后输出的部分数据，格式如下：

[{'cpu_usage': '11.67',
  'disk_status': 'diskname: /dev/vda1 used: 35G nouse: 59G USAGE: 35.35% '
                 'diskname: /dev/vdb1 used: 243G nouse: 225G USAGE: 49.29%',
  'es': 'Es_service: OK  pid is 20488',
  'ip': '172.16.1.21',
  'mem_usage': '27.13%',
  'network': 'Network: OK'},
 {'cpu_usage': '3.14',
  'disk_status': 'diskname: /dev/vda1 used: 23G nouse: 445G USAGE: 4.67%',
  'ip': '172.16.1.22',
  'mem_usage': '12.86%',
  'network': 'Network: OK',
  'rabbitmq': 'Rabbitmq_service: OK  pid is 1392'},
  ]

2. 数据写入mysql（用到pampy）

1）创建数据库

create table weekly_check
(
   id             int not null auto_increment,
   project         varchar(30),
   ip             varchar(30),
   cpu      varchar(30),
   mem      varchar(30),
   disk    LONGTEXT,
   network      varchar(60),
   vda1          varchar(20),
   vdb1    varchar(20),
   service          LONGTEXT,
   create_time timestamp null default current_timestamp,
   primary key (id)
);

2）写入mysql

pampy在这里的作用，主要是找出2块磁盘的使用率，作为数据插入到”vda1″,”vdb1″字段。

这样数据库就有了巡检数据。

import json,pymysql
import re
from pampy import match, HEAD, TAIL, _
#前面巡检的部分数据
data = [{'cpu_usage': '11.67',
  'disk_status': 'diskname: /dev/vda1 used: 35G nouse: 59G USAGE: 35.35% '
                 'diskname: /dev/vdb1 used: 243G nouse: 225G USAGE: 49.29%',
  'es': 'Es_service: OK  pid is 20488',
  'ip': '172.16.1.21',
  'mem_usage': '27.13%',
  'network': 'Network: OK',
  'service': {'boot_log': 'Bootlog: OK',
              'front_service': 'Front_service: OK!  pid is 16608',
              'nodejs_service': 'nodejs_service: NOT OK'}
 },
 {'cpu_usage': '3.14',
  'disk_status': 'diskname: /dev/vda1 used: 23G nouse: 445G USAGE: 4.67%',
  'ip': '172.16.1.22',
  'mem_usage': '12.86%',
  'network': 'Network: OK',
  'rabbitmq': 'Rabbitmq_service: OK  pid is 1392',
  'service': {'mysql': 'mysql: OK'}
  }
  ]
def conn_mysql(sql,value):
    dbparam = {
        'host': '127.0.0.1',
        'port': 3306,
        'user': 'root',
        'password': '1024',
        'database': 'alerts',
        'charset': 'utf8'
    }
    conn = pymysql.connect(**dbparam)
    cursor = conn.cursor()
    try:
        cursor.execute(sql,value)
        conn.commit()
    except Exception as e:
        print('入库失败', e)
        conn.rollback()
    finally:
        cursor.close()
        conn.close()
for info in data:
    sql = "insert into weekly_check(project,ip,cpu,mem,disk,network,vda1,vdb1,service) values (%s, %s, %s, %s, %s, %s, %s, %s, %s)"
    disk_status = info['disk_status']
    #多个“服务”用字符串拼接，举个“nginx is ok”和"tomcat is ok"
    service = ''
    for k,v in info['service'].items():
        # 多个“服务”用<br>换行符分割，前端可以识别它进行换行
        service = service + v.split('pid')[0].strip() + '<br>'
    # 网络连接。主要是为了方便前端显示，如果ok则直接显示“正常”
    if info['network'] == 'Network: OK':
        info['network'] = '正常'
    else:
        info['network'] = '异常'
    # 磁盘字符串长度大于60说明有2块磁盘
    if len(disk_status) > 60:
        #取出两块磁盘vda1,vdb1的使用率
        re_regular = re.compile('diskname: (/w+/w+).*USAGE: (.*)% diskname: (/w+/w+).*USAGE: (.*)%')
        m = match(disk_status, re_regular, lambda a,b,c,d: b+','+d)
        vda1,vdb1 = m.split(',')
        disk_status = info['disk_status']
        #去掉第一个USAGE
        disk_status = re.sub('USAGE: .*% ', '', disk_status)
        # 去掉第二个USAGE
        disk_status = re.sub(' USAGE: .*%', '', disk_status)
        #去掉第一个diskname，第二个diskname替换为换行符<br>
        disk_status = disk_status.replace('diskname: ', '', 1).replace(' diskname: ', '<br><br>')
        conn_mysql(sql, ('游戏',info['ip'], info['cpu_usage'], info['mem_usage'].strip('%'),
                         disk_status,info['network'],vda1,vdb1,service))
    else:
        #只有一块磁盘vda1
        re_regular = re.compile('diskname: (/w+/w+).*USAGE: (.*)%')
        m = match(disk_status, re_regular, lambda a,b: b)
        conn_mysql(sql, ('游戏',info['ip'], info['cpu_usage'], info['mem_usage'].strip('%'), info['disk_status'],info['network'],m,'无',service))

3、vue展示内存百分比

el-progress组件，使用率小于50%显示绿色，50%~75%显示橙色。

<span v-if="item.prop === 'mem'"><el-progress :text-inside="true" :stroke-width="13"  
:percentage="scope.row[item.prop]" status="success" v-if="scope.row[item.prop] < 50">
</el-progress>
</span>
<span v-if="item.prop === 'mem'"><el-progress :text-inside="true" :stroke-width="13"  
:percentage="scope.row[item.prop]" status="warning" v-if="scope.row[item.prop] >= 50 && scope.row[item.prop] < 75">
</el-progress>
</span>

小结

很多模块和工具开箱即用，是节省时间的利器，可以用它搭个便车。

1 原创文章作者：1120，如若转载，请注明出处： https://www.52hwl.com/108084.html

2 温馨提示：软件侵权请联系469472785#qq.com（三天内删除相关链接）资源失效请留言反馈

3 下载提示：如遇蓝奏云无法访问，请修改lanzous(把s修改成x)

4 免责声明：本站为个人博客，所有软件信息均来自网络修改版软件，加群广告提示为修改者自留，非本站信息，注意鉴别

三个Python小工具，Linux服务器性能直线飞起！！！

下面详细介绍这3点：

1. 一行代码实现并行

2. 数据写入mysql（用到pampy）

3、vue展示内存百分比

小结

关于作者

1120注册用户

三个Python小工具，Linux服务器性能直线飞起！！！

下面详细介绍这3点：

1. 一行代码实现并行

2. 数据写入mysql（用到pampy）

3、vue展示内存百分比

小结

关于作者

1120注册用户

相关推荐